News


  • Advantages of PET bottles

    Advantages of PET bottles

    Lightweight Strength Market expansion (specifically for PET beverage bottles)

    Read more

  • Life Cycle Analysis (LCA): metal tight head barrels

    Life Cycle Analysis (LCA): metal tight head barrels

    Below you will find the reconditioning process for metal drums: 1️⃣ Collection: Used metal drums are collected and returned to the manufacturer for reprocessing. 2️⃣ Inspection: When the drums arrive, they are immediately inspected and classified according to quality. 🔹 Approved for chemical reconditioning: The drums are cleaned both internally and externally with detergents and water under high

    Read more

  • Life Cycle Analysis (LCA): Metal Open Head Drums

    Life Cycle Analysis (LCA): Metal Open Head Drums

    Below you will find the reconditioning process for metal drums: 1️⃣ Collection: Used metal drums are collected and returned to the manufacturer for reprocessing. 2️⃣ Inspection: When the drums arrive, they are immediately inspected and classified according to quality. 🔹 Approved for chemical reconditioning: The drums are cleaned both internally and externally with detergents and water under high

    Read more

  • Verbetering van metalen dekselvaten

    Verbetering van metalen dekselvaten

    Greif improvement of the 200L UN Liquid drums, no production of 200L drums from June 6-17, 2024 With this message, we want to inform you that Greif has planned an upgrade to their large metal drum production line in Ghent. Between June 6 and 17, they will be replacing part of the production line, which will…

    Read more

  • Single-Use Plastics directive

    Single-Use Plastics directive

    De EU-richtlijn 2019/904, ook wel bekend als de “Single-Use Plastics Directive”, is een richtlijn van de EU die bedoeld is om de hoeveelheid plastic afval te verminderen.  Een specifieke maatregel in deze richtlijn zegt dat drankverpakkingen tot 3 liter voor éénmalig gebruik vanaf juli 2024 alleen nog verkocht mogen worden als de dop er tijdens…

    Read more

  • What are the advantages of In-Mold Labeling (IML)?

    What are the advantages of In-Mold Labeling (IML)?

    In-Mould Labeling (IML) is een proces waarbij labels tijdens het spuitgietproces rechtstreeks in de mal of matrijs worden geplaatst voordat het plastic wordt geïnjecteerd. Dit zorgt ervoor dat het label en de verpakking aan elkaar smelten waardoor je een egaal eindproduct bekomt.  Voordelen:  Nadelen: 

    Read more

  • What does our logo stand for?

    What does our logo stand for?

    Ons logo Ons logo bevat het Yin-Yangsymbool, dat balans, harmonie en verbondenheid symboliseert. Deze symboliek weerspiegelt de samenwerking tussen Moens Verpakkingen, haar klanten en leveranciers.  De klanten en leveranciers van Moens Verpakkingen vervullen complementaire rollen, vergelijkbaar met Yin en Yang. Moens verpakkingen is een sterke schakel hiertussen om goede, wederkerige relaties op te bouwen en…

    Read more

  • Hoe worden PET flessen gemaakt?

    Hoe worden PET flessen gemaakt?

    PET flessen kunnen geproduceerd worden in een 1-stage proces of een 2-stage proces. Ontdek hieronder het verschil: 1-stage (One-Step) Proces: 2-stage (Two-Step) Proces: Het 2-stage proces is verdeeld in twee afzonderlijke stappen:  Samenvatting: Beide processen resulteren in hoogwaardige PET-flessen die geschikt zijn voor voedselverpakkingen en andere toepassingen.  🌟

    Read more

You do your core business,

we the packaging

Trust Moens Packaging as a wholesale distributor of packaging materials.



© 2026 MonkeyProof, All Rights Reserved.